Machines
Organic waste & bio-waste treatment
- Details
- Category: Machines
Pulperizer
|
Bio-extruder
PELLETIZER FOR COMPOST |
Organic cleaning
|
Densification & briquetting
- Details
- Category: Machines
The patented and unique worldwide PES – Promeco Extruder System - is the simplest, most flexible, efficient and effective solution to the problems of agglomeration and volume reduction producing briquettes and pellets.
Recyclable waste
The high flexibility allows the treating of different materials:
- Mixed plastics, paper and cardboard, textiles and wood
- Commercial waste and waste residual from sorting plants
- Industrial solid waste similar to municipal waste
- Plastics:PE, HDPE, EPS, PP, PVC, polymers from ASR
- Mixed inorganic fraction of MSW used as RDF (lightweight plastics, textiles, wood, paper and cardboard)
- ASR Car fluff,pre-treated
- Wood waste and green waste
Endless applications
- RDF pellets,thickened or briquettes
- Profiles and/or finished goods (e.g.: spacers for pallets; poles for agriculture, wheel stoppers, profiles for walls structures and insulation, curbs outdoor)
- Agglomeration of mixed plastics
- Pre-treatment of the organic fraction for composting
- Production of wood fiber from wood chips or wood waste
The PES is even suitable for the pre-treatment of plastic film from washing lines
Densification
|
Briquetting
PROMECO EXTRUDER SYSTEM PES M MATRIX |
PelletizingAGGLOMERATION & PELLETIZING LINE
|
Our models
- Screw diameter: 300 or 600 mm
- Motor (with inverter): 90, 315 or 400 kW
- Power consumption 50-60% of power installed
- Production: from 350 to 2.200 kg/hour or 30 m3/h
Flexibility
- The waste usually has different size, water content, density and composition. The PES is able to handle this difference in the best way.
- The control system, based on PLC logic, continuously checks the most important parameters as current and temperature on the output plate of the machine and arranges the working process automatically.
- The main motor is generously oversized to maintain the production rate even in presence of material “difficult” to treat.
- The average consumption is 60% of the installed capacity.
- Control system based on PLC to monitor continuously several parameters as electrical power consumption and temperature of the extruded material, and to adjust the operations of the machine.
Shredding
- Details
- Category: Machines
Promeco designs and manufactures shredders for every kind of waste and is able to provide solutions to every client’s need. With the experience gained in over 20 years, Promeco has been manufacturing single and two-shafts shredders, mills for coarse shredding and with screens.
Primary shreddershredding up to 150-400 mm Suitable for:
|
Secondary shreddershredding up to 15-150 mm Suitable for:
|
Grindergrinding up to 3-15 mm Suitable for:
|
THE SHREDDING CONCEPT
TWO SHAFTS - OUTPUT SIZE 150-400 mm (without grid)
SINGLE SHAFT - OUTPUT SIZE 50-150 mm (with grid)
GRINDER - OUTPUT SIZE 3-15 mm (with grid)
DIFFERENT ROTORS FOR DIFFERENT APPLICATIONS
Rotor for Promeco Premier
Primary shredder for all kind of waste and bulky waste
Rotor for Pormeco Rotor Shears
To shred C&I waste
Rotor for Promeco Bag opener
To open the bags without breacking the content
Rotor for Single shaft shredder Promeco KR
To shred all kind of material with grid
Rotor for fast shredder Promeco KRF
To shred cleaned material
Waste treatment machines
- Details
- Category: Machines
Shredding
|
Densification &
|
Sorting
|
Organic waste &
|
Primary Shredder Promeco Premier
- Details
- Category: Twin shafts shredders
Promeco two shafts shredder Premier is the biggest primary shredder manufactured by Promeco and is suitable for all kind of waste and bulky waste. The main hopper allow the feeding of voluminous waste and the two independent shafts with peculiar disk make the machine suitable to shredding down to
Recyclable waste:
|
Features:
|
Rotor Shears Promeco PRS
- Details
- Category: Twin shafts shredders
PRS shredder has been designed for a clean cut to every kind of waste. The cutting discs are designed according to the material to be processed and the kind of shredding, thus defining the thickness and the disc diameter over the geometry of the hooks. Equipped with rotor’s cleaning knives.
Recyclable waste:
|
Features:
|
Bag opener Promeco PBO
- Details
- Category: Twin shafts shredders
Promeco bag opener PBO is designed to cut the bags without shredding the content. The two rotors are independent with specially designed knives which are ideal to use the machine at the beginning of sorting plants.
Recyclable waste:
Optimal
|
Features:
|
Single Shaft Shredder Promeco KR
- Details
- Category: Single shaft shredder
KR shredders have over 20 years of proven experience and mean realiability, efficiency and solidity.
Our shredders are designed to meet the client’s needs or can be chosen among the different models available. Promeco offers machines with rotors’ lenght from 1000 mm to 2800 mm, and with diameter from 440 mm to 730 mm and motors from 45kW to 250kW. Motors can be hydraulic or mechanical.
Recyclable waste:
|
Features:
|
The material is loaded into the feeding hopper where a pusher moves the material towards the rotor which cuts the material with a clean cut between rotating knives and fixed counter-knives. The shred material goes out from the grid below and it is conveyed through a belt or a suction system.
Fast Single Shaft Shredder Promeco KRF
- Details
- Category: Single shaft shredder
KRF shredders are the evolution of KR in terms of speed of operation.
Recyclable waste:
Optimal for homogeneous materials free from metals |
Features:
|
As the KR, they stand for strength, versatility, reliability, high production with low hourly operating and management costs, as well as ease of maintenance.
Perfect for RDF.
Ø from 10 to 30mm
Fast Grinder Promeco Iggy Mill
- Details
- Category: Fast grinder - Mill
Specifically designed for size reduction of pre-sorted or pre-shredded waste, suitable for RDF/SRF production and other recycling applications.
Different rotor cutting configuration availableHigh performance
Ø from 3 to 15mm
Recyclable waste
|
Caratteristiche principali:
|
Rotor:
Promeco Iggy Mill’s rotor has beed designed according to the kind of material to be processed. Promeco offer different kinds of rotors with different knives according to the specific needs.
Our models
| Models | from | to |
| Power installed | 22 kW | 250 kW |
| Rotor speed | 400 rpm | 700 rpm |
| Rotor length [mm] | 700 – 1.1000 – 1.400 – 1.690 – 2.100 – 2.300 | |
| Rotor diameter [mm] | 400 – 580 – 670 - 900 |
Different size upon request
Download
Briquetting Promeco extruder system PES600M400
- Details
- Category: Briquetting machines
The PES-Briquetting machine is the most flexible, efficient and effective machine to produce briquettes or pellets.
Recyclables waste:
|
Output product:RDF briquettes
Pellet
|
Briquetting Promeco Extruder System PES600-V 400
- Details
- Category: Briquetting machines
The PES V matrix briquetting machine is the most simple, flexible, efficient and effective solution to the problems of densification and sintering.
The extreme flexibility of the machine allows processing of different materials.
Recyclable waste:
|
Output product:
|
Briquetting Promeco Extruder System PES600-F-400
- Details
- Category: Briquetting machines
The PES F matrix briquetting machine is the most simple, flexible, efficient and effective solution to the problems of densification and sintering.
The extreme flexibility of the machine allows processing of different materials.
Recyclable waste:
|
Output product:
|
Densifier Promeco Extruder System PES 600M400
- Details
- Category: Densifiers
The Promeco Extruder System PES is the simplest, most flexible, efficient and effective solution for the densification and agglomeration of the plastic.
Recyclable waste:
|
Features of the output product:
|
The Promeco Extruder System PES is a continuous densifier with counter-rotating augers suitable for the densification of any type of low melting plastics.
Configuration
Operation
The material is fed to the feeding bunker and dosed by the vibrating table which homogenizes the material before the extrusion chamber. Here two counter-rotating screws exert friction on the material and take it up to 180°C to be melted. The melted fuse gets out from the discharge matrix.
Capacity
The treatment capacity depends mainly on the characteristics of the input plastics. The production is about 1500 kg/h with input moisture < 15%.
Advantages of the treatment with PES
- Lower space required for the equipment
- Lower power installed and used than normal system
- Simplified maintenance time and costs
- High productivity and versatility
- Low management and operation cost
System flexibility
Waste has different size, water content, density and composition variable so the PES densifier has been projected to handle this difference automatically in the best way.
Download
Brochure Promeco Plastic Densifier PES
Video
Agglomerator & pelletizer line
- Details
- Category: Pelletizer
The innovative Promeco Pelletizer is made by the combination of PES densifier and a traditional single screw extruder.
- Packaging thin film
- Film from agriculture
Recyclable waste:
|
Prodotto in uscita:
|
The direct combination between the machine PES and the traditional Extruder allows the proper feeding of the material into the single shaft extruder and guarantees an homogeneous production.
Promeco agglomerator dries and pre-melts the plastic material and feeds the single screw extruder directly. The double vent system on the pelletizer grants the residual moisture removal from the product.
The control system, based on the PLC logic, continuously checks the most important parameters as current and temperature on the plate of the machine and then arranges the working process automatically.
Configuration
Capacity
Up to 1.500 kg/h.
It depends on the characteristics of the input plastics and on the required density of the product.
Advantages of PES agglomerator and pelletizer
- Mixing and homogenization of different polymers
- Homogenous and continuous melting
- Completely dry Output product
- Degasing on Promeco Extruder System and therefore not necessary in the traditional extruder
- Shortened melting time
- Few machines to install and manage, reduction of investment costs
- Reduced footprint of the equipment
- Low power consumption (~0,092 kW/kg of input plastic)
Download
Brochure Combi Agglomerator & Pelletizzer
VIDEO
Promeco anti-wrapping screen PEV
- Details
- Category: Screens
he Promeco star screens PEV is the most reliable screen for the separation of all kind of material.
The PEV consists of several parallel rollers installed on a supporting structure and powered by a motor and movement transmission devices. Each roller is a shaft on which several discs and idle tubes are fixed. While the rotation of the shafts moves along further the material, the fine material falls between the discs on the conveyor belt.
The unique feature of the PEV is that every idle tube is provided with a rod connected to another horizontal rod adapted to prevent the complete rotation of the idle tubes: this mechanism allows the PEV to screen every kind of material, even the thinnest ones that would otherwise twist on the rollers causing a blockage of the system.
Screenable materials
|
Screen PDS-R
- Details
- Category: Screens
Dedicated to compost, green waste, wood and bark is the PDS-R star screen, made of parallel shafts and rubber star discs.
The innovative geometry of the discs is that one finger is longer than the others so that it keeps the previous and the following shaft clean while rotating.
Screenable materials:
|
Screen PDS
- Details
- Category: Screens
The Promeco star screens PDS is the most reliable screen for the separation of all kind of NON-WRAPPING material The PDS consists of several parallel rollers installed on a supporting structure and powered by a motor and movement transmission devices. Each roller is a shaft on which several discs and idle tubes are fixed. While the rotation of the shafts moves along further the material, the fine material falls between the discs on the conveyor belt.
Screenable materials:
|
Air Separator Promeco PAS
- Details
- Category: Separators
The air separator Promeco PAS is renowned for its high efficiency in sorting light from heavy materials.
Specifically designed to face the sorting of MSW and similar solid waste, commingled plastic waste or waste from selective collection, the Promeco PAS is designed to handle difference in specific weight of the materials to process and sort 2 fractions:
- Heavy (stones, glass, metal, wood, textile wet ...)
- Light (paper, film, plastics ...)
Recyclable waste:
OPTIMAL FOR FLUFF RDF PRODUCTION AND TO PRESERVE THE SHREDDER |
Balistic Separator Promeco Flip-Flop
- Details
- Category: Separators
Promeco Flip-Flop (PFF) is a ballistic separator designed to separate solid waste according to density, size and shape.
The PFF separes the input material as:
- Fines (inert, organic matter)
- Rolling (3D materials)
- Flat (2D materials)
Recyclable waste
|
Eco dryer ped for plastics
- Details
- Category: Squeezers dryer
The Promeco Eco Dryer is designed to reduce the humidity content and to compact the waste
Recyclable waste:
|
Reliable, versatile, the PED removes the water from 30 to 10% (in case of film material from washing lines), increases the apparent density of the material, even up to a factor of 10, and compacts the treated material.
Configuration
Features
Increasing the density of material from 1 up to 10, compacting and drying from 30% down to 10% moisture.
Download
Eco centrifuge pec
- Details
- Category: Centrifuges
The Promeco Eco Centrifuge PEC is specifically designed for the separation of water from plastics.
Recyclable waste:
|
Input material is loaded into a small feeding bunker, where a screw doses and leads the material into the rotary dryer basket, which rotates at a very high speed.
The centrifugal force is exerted on the material, which is propelled towards the internal surface of the basket and is dewatered. The water is collected at the bottom of the machine.
A screw inside the basket allows the advancement of the material and the continuous cleaning of the internal surface of basket; moreover it continuously mixes the material, optimizing the efficiency of the process.
The entire structure can bear heavy loads, all the components are strong and solid, the forces are balanced.
Configuration
Detailed of the machine
Features
- Automatic continuous lubrication of the bearings
- Reduced time needed for maintenance.
- Adjustable motor and augers speed
- Optimal dewatering capacity for every type of material
- PEC can be operated either automatically or manually
- Continuous process to dry plastic film from washing line, humidity from 30% down to 8%
Download
Pulperizer
- Details
- Category: Pulperizer
The simplest, easiest and most effective solution for the organic fraction treatment.
Recyclables waste:
|
Products:
|
Configuration
Treatment capacity
Compost and organic fraction for anaerobic digestion 25 - 40 m³/h, depending on the mixture composition, the structure and the end size of the product required
Advantages
- Continuous process
- Increase of biogas yield +50%
- No water required
- Low maintenance cost
- Great shorting of the composting time.
- Less surface required for composting.
Promeco defibering Bioextruder © PES600-c
- Details
- Category: Bioextruder ©
Bioextruder Promeco is the simplest, easiest and the most efficient solution for the organic fraction treatment. The technology comes from Promeco Extruder System® machine used for several years in plastic and waste treatment.
Recyclable waste:
|
Product:
|
Promeco Briquetting from Biomass - Bioextruder
- Details
- Category: Bioextruder ©
Promeco technology is able to produce pelletized compost to be improved as fertilizer for agricultural soils with time extended release of organic matters.
Thanks to PES machine, whose technology is patented and unique worldwide, it is possible to turn compost into a stabilized product with potential agronomic advantages.
Recyclable waste:
|
Product:
The output of the Promeco Extruder System is a pelletized compost with more benefits than those of traditional compost |
The PES allows to compact fibrous material as straw, olive pomace, bovine, suine or chicken manure, fruit and vegetable waste or their mixture producing biomass briquettes to be used into biomass furnaces, gasifiers and technologies for electrical and heat power production.
Bioextruder © for organics
- Details
- Category: Bioextruder ©
The simplest, easiest and most effective solution for the organic fraction treatment.
Recyclable waste:
|
Product:
|
Organic extractor PED
- Details
- Category: Organic waste cleaning
To extract organic pulp from organic waste
Designed from the experience gained from waste plastic treatment.
Input material
Organic waste in packaging
Products
Organic substance for anaerobic digestion/packaging
Capacity
Up to 3.000 kg/h
Organic separator POS
- Details
- Category: Organic waste cleaning
Pretreatment for anaerobic digestion process.
To separates the organic from the inorganics of MSW.
The organics is cleaned from contaminants such as plastics or paper.
Designed from the experience gained using the Promeco Eco Dryer in the waste plastic.
Subcategories
Shredding
Promeco designs and manufactures shredders for every kind of waste and is able to provide solutions to every client’s need. With the experience gained in over 20 years, Promeco has been manufacturing single and two-shafts shredders, mills for coarse shredding and with screens.
Twin shafts shredders
Primary Promeco shredders disthinguish themselves for structure robusta and quality of materials, especially for the manufacture of the rotating knives.
The especially designed cleaning system prevents the stringy material to wrap around the shafts.
The two-shaft shredders Promeco have been designed to grind different materials, such as:
- Unsorted municipal solid waste (MSW)
- Commercial waste
- Bulky waste (beds, sofas, refrigerators, doors)
- Industrial waste
- Plastic waste (film, purgings, pallet)
- Pulper waste reject
- Timber, railway sleepers, trimmings of plants
- Organic waste
- Tyres
Single shaft shredder
Promeco secondary shredders distinguish themselves on the market for their precise cut performed by knives and counter-knives , which grants a clean cut of the material avoiding any kind of wrapping. Thanks to this precise cut, single shaft shredders KR allow to shred waste down to 10mm.
Ideal for :
MSW inorganic fraction
- RDF/RPF/SSF
- Plastic / rubber
- Packaging waste
- Light metals as aluminum profiles, cans, light iron scraps
- Textile scraps
- WEEE (waste electrical and electronic equipment)
- Industrial products
- Leather
- Paper and cardboard
- Wood waste
- Cables
Densification & Briquetting
The patented and unique worldwide PES – Promeco Extruder System - is the simplest, most flexible, efficient and effective solution to the problems of agglomeration and volume reduction producing briquettes and pellets.
The high flexibility allows the treating of different materials:
- Mixed plastics, paper and cardboard, textiles and wood
- Commercial waste and waste residual from sorting plants
- Industrial solid waste similar to municipal waste
- Plastics:PE, HDPE, EPS, PP, PVC, polymers from ASR
- Mixed inorganic fraction of MSW used as RDF (lightweight plastics, textiles, wood, paper and cardboard)
- ASR Car fluff,pre-treated
- Wood waste and green waste
Endless applications
- RDF pellets,thickened or briquettes
- Profiles and/or finished goods (e.g.: spacers for pallets; poles for agriculture, wheel stoppers, profiles for walls structures and insulation, curbs outdoor)
- Agglomeration of mixed plastics
- Pre-treatment of the organic fraction for composting
- Production of wood fiber from wood chips or wood waste
The PES is even suitable for the pre-treatment of plastic film from washing lines
Models:
- Screw diameter: 300 or 600 mm
- Motor (with inverter): 90, 315 or 400 kW
- Power consumption 50-60% of power installed
- Production: from 350 to 2.200 kg/hour or 30 m3/h
Flexibility:
- The waste usually has different size, water content, density and composition. The PES is able to handle this difference in the best way.
- The control system, based on PLC logic, continuously checks the most important parameters as current and temperature on the output plate of the machine and arranges the working process automatically.
- The main motor is generously oversized to maintain the production rate even in presence of material “difficult” to treat.
- The average consumption is 60% of the installed capacity.
- Control system based on PLC to monitor continuously several parameters as electrical power consumption and temperature of the extruded material, and to adjust the operations of the machine.
